泡沫海綿壓陷硬度測試儀主要方法：用戶可按照要求選擇方法 以設定速度加入式樣測得壓入量的力值測得zui大力值記錄當下力值 在以設定速度返回  

泡沫海綿壓陷硬度測試儀制作標準：  
           GB10802軟質聚氨醋泡沫塑料           
           GB10807-2006 軟質泡沫聚合材料壓陷性能測試標準

主要適用于軟質泡沫聚和材料如：海綿、泡沫等壓陷硬度在國家標準要求的A法、B法、C法下對標準尺寸的海綿、泡沫等試樣進行標準的測試，測出海綿、泡沫等材料的壓陷硬度。本儀器采用計算機控制，可對試驗過程中的各種數據進行快速、準確的采集、處理，并可存取、顯示、打印，精準的曲線力值雙向顯示更直觀的顯示式樣的測試結果 采用精密嵌入式cpu控制方式也可直接測定座椅靠背等 不規(guī)則海綿

壓陷量預先設定,通過計時電路精確控制壓陷量;            
 使用方便：采用高精度壓力傳感器和大規(guī)模集成電路；
 測定精確：提供三種測定壓陷硬度的方法；

可選方法分為三種：A 法B法 C法用戶自行設定

技術參數

（1）、速度：100mm/min； ±20mm  
（2）、壓陷硬度測定范圍:0-2000.0 N
（3）、測力zui小分辨率:0.25 N  
（4）、測定誤差:<1%

（5）、zui大行程3500mm 可根據客戶要求

（6）、壓頭直徑200mm

（7）、實驗平臺 500*600/mm

（8）、放氣孔分布直徑 250*250/mm

（9）、整機尺寸 500*600*800/mm

（10）、供電方式220V/50Hz 

功能特點

主要配置：    

    測試主機一臺 

    壓盤一支   

   傳感器一支（200公斤輪輻式）

   計算機/EPC   

   彩色噴墨打印機一臺

    控制軟件一套

   電源線   一條 

Main methods: sponge sag hardness tester user selection method in accordance with the requirements Measured in the set speed to join fashion strength measured the amount of pressure into the most strongly values recorded when the dint value Back in the set speed

Sponge sag hardness tester is making standard:

GB10802 soft polyurethane foam vinegar

GB10807-2006 soft foam polymeric material sag performance testing standards

Is mainly suitable for soft foam polyethylene and materials such as sponge, foam, such as sag hardness in the national standard requirements by the method of A, B, C standard size of sponge, foam, such as sample standard test, measure the pressure of sponge, foam materials such as hardness. The instrument adopts computer control, to test the various data in the process of rapid and accurate collection, processing, and can access, display, print, the curve of the precise force value two-way display more intuitive display style of the test results Adopts precision embedded CPU control method can also be directly backrest, etc Irregular sponge

Sag amount preset, through accurate control timing circuit sag;

Easy to use: pressure sensor with high precision and large scale integrated circuit;

Determination of accurate: provide three methods of determination of sag hardness;

Optional method is divided into three types: A method of B C users to set

Sponge sag hardness tester technical parameters

(1), speed: 100 mm/min. Plus or minus 20 mm

(2), sag stiffness measurement range: 0-2000.0 N

(3), minimum load resolution: 0.25 N

(4), measuring error: < 1%

(5), the maximum 3500 mm can according to customer's requirements

(6), the pressure head diameter is 200 mm

(7), 500 * 600 mm/experiment platform

(8), vent hole diameter distribution of 250 * 250 / mm

(9), the machine size 500 * 600 * 600 / mm

(10), the power supply of 220 v / 50 hz

Sponge sag hardness tester is functional features

Automatic reset

Computer received instructions after the beginning of the experiment, the system automatically reset.

overload

When the load exceeds rating automatic stop.

limit

With SPC and mechanical limit.

The results of

Test results can access, analyze the data curve.

According to

Dynamic display of data and curve test process.

appearance

Professional graphic design and easy, simple

The control method

Can choose according to the need of experimental test, the test speed, displacement, strain test method, etc

Calibration value for

The system can realize a strength of accurate calibration.

Change the speed

The machine according to different samples, arbitrarily change the test speed.

Automatic shift

According to the size of the load, it can switch different gear, to ensure the accuracy of measurement.

Automatic return

The test is finished, return to the initial position.

The control mode

Can players control/computer/EPC

Storage test

Automatic storage Easy to obtain

Communication methods

RS232 / USB/Asia Pacific network port (optional)

Sponge sag hardness tester is the main configuration:

The test host

Pressure plate a

A sensor (200 kg hub-and-spoke)

Computer/EPC

Color ink jet printer

A set of control software

The power cord a